Dec 27, 2021
Posted by: Cameron Davidson-Pilon
We've been working on the version 2 of our HAT for over 6 months now, putting together all the improvements, learnings, and ideas since testing our version 1 board. In this post, we'll go through some of the changes that we are most excited about.
Dec 13, 2021
Posted by: Cameron Davidson-Pilon
Each Pioreactor has built-in heating and temperature sensors. I emphasize temperature sensors, since I've used enough hot plates to not trust a graduated knob to have any reliability. With a combination of heating and temperature sensors, the Pioreactor is able to keep a set temperature for the culture, regardless of the Pioreactor variations in the construction, ambient temperature, etc.
Nov 12, 2021
Posted by: Cameron Davidson-Pilon
We care a lot about onboarding. I've seen enough Raspberry Pi projects that seem to require deep experience in software compilers and package management (don't worry if you don't know what those are...) before you can get started. This is an immediate barrier to your project! From a "funnel" perspective, you may end up losing up a large fraction of your users just at this stage. Can we do better?
Nov 04, 2021
Posted by: Cameron Davidson-Pilon
Algae have a very different set of living conditions compared to other organisms that we have tested in the Pioreactor. Algae require both light and CO₂ to grow. We had the foresight to think of algae's unique growing requirements during development, hence the Pioreactor has additional pockets for LEDs in the main body. When these pockets are occupied by white-light LEDs, the Pioreactor turns from a bioreactor into a photo-bioreactor.
Oct 11, 2021
Posted by: Cameron Davidson-Pilon
We just released a new plugin that may be useful for teams that use Slack. The plugin, Logs2Slack, will publish logs from the Pioreactor to a chosen Slack channel, so you and your team can discuss important events in Slack. Installation is quite easy, too!
Oct 06, 2021
Posted by: Cameron Davidson-Pilon
A few months ago, we introduced temperature control via internal heating to the Pioreactor. This has been a success, and something that differentiates us from other bioreactors, but it was creating artifacts in our optical density measurements. Why is that? Well, an LED's brightness varies as the temperature changes: a higher temperature reduces brightness, and lower temperatures increase brightness.
Sep 23, 2021
Posted by: Cameron Davidson-Pilon
The role of stirring in the Pioreactor is important for a few reasons: i) it allows for modest gas exchange between the media and the air, ii) more importantly: it creates a homogenous environment for microbes and nutrients alike. This last point also means that our optical signals won't vary spatially - something that would make the whole system much more complicated.
Sep 13, 2021
Posted by: Cameron Davidson-Pilon
The past few weeks I've been thinking a lot about optics. Too much. It's given me a headache. But we've characterized some really important details about how the Pioreactor works. Let's first talk about how microbial cells interact with light.
Aug 27, 2021
Posted by: Cameron Davidson-Pilon
By design, there is no Pioreactor "cloud". That is, all your collected data, the web interface, and computations are hosted locally on the Raspberry Pis. This has a number of benefits for you, the user:
